Light pilot instructions

Step 1: Turn on the gas to the fireplace by turning the gas key counterclockwise.

Step 2: Position the control knob, on the valve, inside the fireplace to “PILOT” at 12 o’clock.

Step 3: Press in, on the black control knob.

Step 4: Using a long lighter, hold the flame under both the pilot head until you see the pilot flame.

Step 5: Continue holding the knob in for at least 60 seconds.

Step 6: Release the control knob. If the pilot stays lit, proceed to the next step. If not, repeat steps 3-5 until the pilot remains on. It sometimes takes longer at the start of the season, Try holding longer, than 60 seconds if needed.

Step 7: Once the pilot stays lit, move the control knob to the “ON” position. The main valve to the burner pan will now open and light your burner.